HPE Community
ProLiant Servers (ML,DL,SL)
1834007 Members
1774 Online
110063 Solutions
New Discussion

Raid Array

 
Ayman Altounji
Valued Contributor

‎03-28-2001 04:00 PM

‎03-28-2001 04:00 PM

Raid Array

I would like to move a raid array from a Proliant 1500 to my 3000. Suggestions??
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎07-24-2001 04:00 PM

‎07-24-2001 04:00 PM

Re: Raid Array

Not trying to state the obvious, but ensure you have a couple known good backups first. If this is hardware based RAID I'd make sure you move the drives in the same slot order (1500-Slot 0 to 3000-Slot 0, etc.) and let the array controller in the 3000 "discover" the volume. You may also want to ensure both array controllers are at most current version before and I even think there is a way to save your RAID configuration to diskette within the Array Configuration Utility. Good Luck.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.