[SOLVED] Re: RAID Controller not detected from Intelligent Provisioning

[robytlk]

Ho anche io lo stesso problema.
Il mio Intelligent Provisioning vede MR416. Ho potuto configurare gli array correttamente. I dischi sono riconosciuti e hanno fatto l'inizializzazione.
Quando però avvio il setup di windows server, i dischi non sono riconosciuti. Ho anche creato il file ISO di windows con i driver Megasas35, ma non si avvia ugualmente, con il messaggio "drive.volumes is undefined"

Avete una soluzione, per favore ?

--------------------------------------------------------------------------------------------

I also have the same problem.
My Intelligent Provisioning sees MR416. I was able to configure the arrays correctly. The disks are recognized and initialized.
However, when I start the Windows Server setup, the disks are not recognized. I also created the Windows ISO file with the Megasas35 driver, but it still doesn't boot, with the message "drive.volumes is undefined"

Do you have a solution, please?

[TVVJ]

Hello,

You may require the driver for the array controller. You may download it from the HPE MegaRAID (MR) controller software download page and see if it helps:

HPE MR Gen10 Plus Controllers.

Regards,

[robytlk]

@TVVJ Grazie per la tua risposta.

Avevo già incluso il driver della MegaRAID nella ISO di Windows 2022. Infatti se faccio avviare direttamente windows dal boot su USB i dischi si visualizzano.

Non sono visti se utilizzo "Rapid Setup" di Intelligent Provisioning, quindi penso che sia questo software che non ha il driver aggiornato.

Come posso aggiornare i drive di Intelligent Provvisioning, per favore ?

Grazie e saluti

Google Translated: 

Thank you for your answer.

I had already included the MegaRAID driver in the Windows 2022 ISO. In fact, if I start Windows directly from the USB boot, the disks are displayed.

They are not seen if I use Intelligent Provisioning's "Rapid Setup", so I think it is this software that does not have the updated driver.

How can I upgrade Intelligent Provisioning drives, please?

Thank you and greetings

[TVVJ]

Hello,

If the server is a Gen11 server, then download and install "Intelligent Provisioning Recovery Media for Gen11".

If the server is a Gen10 server, then download and install "Intelligent Provisioning Recovery Media for Gen10 and Gen10 Plus".

Regards,

[robytlk · Accepted solution]

Thank you for your answer
I had already tried to update using a USB stick, but it didn't work.

I burned a DVD with the intelligent provisioning ISO and it finally updated
Now recognizes MD416 controller from I.P.

thanks everyone for the help

best regards

[Sunitha_Mod]

Hello @robytlk,

That's Awesome! 

We are extremely glad to know you were able to find the solution and we appreciate you for keeping us posted. 

[robytlk]

Another small intelligent provisioning bug

1) Performed the update as mentioned above
2) Prepare the USB stick with the Windows 2022 ISO downloaded from the Microsoft website
3) Started I.P - launched "Rapid setup"
4) The discs are recognized
5) Windows installation starts
6) Windows installation crashes due to "the origin of the ISO image is not recognised)

Installed Windows without I.P - Completed successfully.

P.S.

I suggest correcting I.P. or modify the installation procedure guides because they don't work that way

Best regards

[mizogmo]

@robytlk hi friend

I have the same problem, after update 
The above methods did not work

my server hp dl380 g10

and p408i-a controller

plz help me thanks

[robytlk]

Ho riscontrato i seguenti bug, non so se risolvono per te

1) scarica l'aggiornamento di I.P. dai link indicati sopra nel post

2) crea un DVD fisico (BUG-1 con la USB non funziona) e esegui l'aggiornamento (avviando da F11 boot menù il DVD) - i tuoi dischi saranno visibili

3) crea la USB (o DVD doppia faccia) con il S.O. Windows Server

4) (BUG-2 Installare Windows da I.P. non funziona) - All'avvio del server premi F11 per il menù di boot e seleziona l'unità con il windows - installa windows

5) scarica SPP dai link di HPE e prepara una USB con la ISO

6) lancia  "launch_sum.bat" come amministratore da windows per aggiornare driver e software

Questa procedura ha funzionato per me

Regards

Google Translated: 

I encountered the following bugs, I don't know if they fix it for you

1) download the I.P. update. from the links indicated above in the post

2) create a physical DVD (BUG-1 with USB does not work) and run the update (booting the DVD from the F11 boot menu) - your disks will be visible

3) create the USB (or double-sided DVD) with the OS. Windows Server

4) (BUG-2 Installing Windows from I.P. doesn't work) - When the server starts, press F11 for the boot menu and select the drive with windows - install windows

5) download SPP from the HPE links and prepare a USB with the ISO

6) launch "launch_sum.bat" as administrator from windows to update drivers and software

This procedure worked for me