Raid Volumes not appear on RHEL 7.1 installation Screen to install OS

[nvkrishna]

*DL380E GEN8

*64GB DIMM

*E5-2420

*B320I CONTROLLER WITH 7*300 GB SAS DRIVES Eqiped with Raid 1 and Raid 5 created.

while installing RHEL 7.1 OS on B320I controller Logical Drives are not appeared at Installation prompt to select further OS installation, I have Storage Controller Drivers hpvsa-1.2.16-136.rhel7u7.x86_64.dd / hpvsa-1.2.16-136.rhel7u8.x86_64.dd

kindly lets know process step by step to install controller drivers pre-installating RHEL OS.

[support_s]

System recommended content:

1. HP Insight Control Server Migration 7.1 User Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Cali]

Hello,

the B320i supports SAS Drives only with an optional SAS License Key.
Can you check, if this License Key (BC393A) is installed?

Cali

[nvkrishna]

kindly find attached snap of RHEL instllation page, Raid Disk's are not showing up.

[nvkrishna]

Already SAS Lisense already Installed, SAS Drives are visible and created Raid also.

[TVVJ]

Hello,

Click here for the HPE Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 7 (64-bit). Please review the "Installation Instruction" for installing the driver. Hope this helps!

Regards,

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[nvkrishna]

@Cali @TVVJ 

above givien installation didnt work

[TVVJ]

Hello,

You may contact HPE Support for further assistance.

Regards,