Query: Remplace in place - DL380 Gen10 to DL380Gen11

[jneau]

Hello,

A replace in place Simplivity is authorised and functional DL380gen10+ to DL380gen 11 ?

Thanks for your reply,

Julian,

[NeetSat]

Hi Julian,

Good day. 

Could you please help us more with details related to what your query would be?
Would this query be related to SimpliVity OR Proliant? 
Also since the replacement is authorized, so what are you looking from the support point of view for the assistance, since i can then guide you to the support team for any further assistance. 

I look forward to your response. 

Regards.

[jneau]

Hello,

Yes, this request concerns Simplivity. For infrastructure renewals from Gen10 to Gen10, I generally use ‘replace in place’. I was wondering if it was still possible to go from Gen10 to Gen11 or to install the new infrastructure in parallel and migrate the vms.
Thank you very much,

Have a good day,

Julian,

[NeetSat · Accepted solution]

Hi Julian,
Good day. 

Currently, we have Gen11 Servers, and it can be deployed in the same cluster as Gen10's however would recommend proceeding with a new Cluster for the Gen11 to utilize the full potential of the Gen11 servers.
There are still the pre-reqs that needs to be followed for the deployment, which can be referred from the SimpliVity Interop Guide.

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00117319en_us

Regards

[NeetSat]

Hi Julian,
Good day. 
We havent received any response to the above details shared with you, so would like to know if the query has been taken care or would you like us to help/guide you further. 

If you think its all good, then please help us confirm or mark the post as (thumbs up sign) so that way, we can proceed to close the query. 

Regards,

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

[NeetSat]

Hi Julian,
Good day. 
We still haven't received any response from your end. We shall be archiving this query for now, however feel free to get back to us and we can look into it further again. 

Regards.