HPE Community
ProLiant Servers (ML,DL,SL)
1756997 Members
2140 Online
108858 Solutions
New Discussion юеВ

Replacing HOT Swap HDD in ML 350 G6 Server with P450i

 
pankajsandilya
Occasional Visitor

тАО10-12-2019 02:48 AM

тАО10-12-2019 02:48 AM

Replacing HOT Swap HDD in ML 350 G6 Server with P450i

Replace bad hard drive in an HP ML350 G6

Hello,

I have an HP ML350 G6 server with 2 diks in raid 1 and one of them is bad.
I wanted to know if i need to shutdown the server in order to replace the bad hdd.

I already have a new hdd with the same part number as the faulty one (459319-001)

Thank you

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО10-13-2019 01:55 PM

тАО10-13-2019 01:55 PM

Re: Replacing HOT Swap HDD in ML 350 G6 Server with P450i

No shutdown needed. Rip out the bad disk, insert the new disk and check for started rebuild.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
SanjeevGoyal
HPE Pro

тАО10-13-2019 08:21 PM

тАО10-13-2019 08:21 PM

Re: Replacing HOT Swap HDD in ML 350 G6 Server with P450i

Hello,

You can replace the faulty hard disk online in raid 1, raid 5, raid 6.....

Let me know for further assistance.

If you feel this was helpful please click the KUDOS! thumb below!  

Regards,

Sanjeev Goyal

 


I am a HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.