HPE Community
ProLiant Servers (ML,DL,SL)
1847005 Members
4502 Online
110257 Solutions
New Discussion

Re: Retrieve WWN of an HBA card

 
SOLVED
Go to solution
Alberto Yanes
New Member

‎12-23-2008 06:03 AM

‎12-23-2008 06:03 AM

Retrieve WWN of an HBA card

Hi,
I need to retrive the WWN of an HBA card.
The numbers are not shown on the back of the card and no OS is installed on the server.
It is a DL385G2.
Is there any way to retrieve these number using the Setup or something else?
0 Kudos
Reply
3 REPLIES 3
Jimmy Vance
HPE Pro

‎12-24-2008 04:17 AM

‎12-24-2008 04:17 AM

Solution

Re: Retrieve WWN of an HBA card

If your using a QLogic HBA, you can hit CTRL-Q during POST and go into the HBA setup utility to find the "Adapter Port Name"
No support by private messages. Please ask the forum! 
Reply
Alberto Yanes
New Member

‎12-24-2008 04:35 AM

‎12-24-2008 04:35 AM

Re: Retrieve WWN of an HBA card

That worked.
Thank you very much...
0 Kudos
Reply
Shiraj Fernando
Regular Advisor

‎12-24-2008 07:37 AM

‎12-24-2008 07:37 AM

Re: Retrieve WWN of an HBA card

Hi,

You can also use the following online utilities to retrieve adapter info.

QLogic -> Sansurfer
Emulex -> HBAnywhere

Merry Christmas,
Shiraj.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.