riblo

[Ayman Altounji]

if i conect through the riblo card's conector a mouse is not detected. my server will not detect a mouse unless conected direcly to the server's mouse port. NOTE my server is not conected thruogh a kvm.

[Ayman Altounji]

I think it's because the RILOE and new generation machines don't connect the same way. I think you have a connector from the RILOE that goes to the system board and you do connect keyboard and mouse to the server's ports ( on the older version, you had a Y cable going from the RIB to the ps2 ports but that had gone now )

[Ayman Altounji]

Just take a look on the matrix for compaq servers ......
http://www.compaq.com/manage/remote-lightsout-server-slot-matrix.html