HPE Community
ProLiant Servers (ML,DL,SL)
1825731 Members
2726 Online
109687 Solutions
New Discussion

SAS disk failure

 
lu1fmo
Occasional Contributor

‎11-08-2010 06:39 AM

‎11-08-2010 06:39 AM

SAS disk failure

Hi, i hope someone can help me with this. I have 2 ML 350 g5. One with 4 disk sas 10k 146 gb, one with one port and the other 3 with 2 ports. The RAID is 1+0.

And the other server have RAID 1, with 2 sas 10k 146 gb, one with one port and the other with 2 port. Firmware 1.84

Last weak one disk of the server with 4 disk failed ( the one with one port ) in the bay 1. Server still running fine.

Can i replace the failed disk on the server with raid 1+0 with the sas disk in the other server ( the one with two port ). This action will work fine? Can a i do this just unplugging the disk and put in the other server? I supossed that i must shut down the server that have 2 disk, take one disk and put in the other server powered on?

 

 

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.