SCO 5.0.7 on ML570 crashes after EFS install.

[Remco Koot]

Hello,

We have a ML570 G2 (Dual Xeon 2.0Ghz) machine and running Openserver 5.0.7 with SMP.
Also the SmartArry 5404 installed fine on default. (ciss controller)

Everything runs fine, until I installed EFS, latest available today.

The machine crashes, atleast becomes very,very slow... no key response in minutes, and gives the folowing error:

ciss: controller heart beat stopped , trying to reset

Any ideas?

Thanks in advance!

Remco Koot

[Haultecoeur]

I have the same problems with the version 5.60A , you need to install only the version 5.58b

If you have a board RILOE II, you must retire this board and your computer will run .

[Remco Koot]

Hello!

Thanks for reply.

At first I had installed EFS 5.58B. That one gave the CISS: heart beat error.
Therefore I searched for a newer one, and the latest gave the same error.

So for me I guess 5.58B is not the solution.

I also have no RIOLE II board installed.

Whatelse could be wrong?

Thanks again!

-Remco Koot