Server Critical Fault (Service Information: Runtime Fault, Memory, CPU 1 Memory Channels

[Sperandio]

Server power down with the indication: Proliant ML110 Gen9 Server Critical Fault (Service Information: Runtime Fault, Memory, CPU 1 Memory Channels 1-4 (01h))

Coincidently this error occurs after an AC power lost and recovered during a very short time (less than 1 to 2 seconds).

Two questions:

1) How can I solve it?

2) Can this problem caused by a short time AC Power lost?

[Suman_1978]

Hi,

In such scenario, we would suggest to perform Diagnostics and see if any memory modules are faulty.
Check the Integrated Management Logs via iLO to see if any memory modules are faulty.

You may also update the server BIOS and other firmwares.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[ManBha]

Hello,

The issue is similar to the below advisory:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00073571en_us

If the issue persists,

please do perform a minimum configuration to isolate the faulty part and log a case with us using link https://support.hpe.com/connect/s/?language=en_US to review the logs.

Thanks.

[Sperandio]

I agree that my problem is similar to the advisory sent. How long should I press the power button to "Physically press the power button to recover the system from a brownout."?

I find other message on forum (link below) that similar problem was solved replacing system board. But before replace my system board, I would like to confirm that there is nothing to do to solve the problem.

https://community.hpe.com/t5/proliant-servers-ml-dl-sl/proliant-dl380-gen10-server-critical-fault-service-information/td-p/7121811#.Y8FNef7MJD8

Whe I try to power on the server, the system halts before power on self test (POST). When I remove ram memory from system board, the system starts until POST error due ram memory lack.

[ManBha · Accepted solution]

Hello,

Please remove the external power cables and press and hold the power button for 20-30 seconds.

If the issue is with the RAM, I would suggest you to perform a minimum configuration with 1 CPU and 1 DIMM and then adding the memory modules one after the other to isolate the faulty DIMM.

Thanks.

[Sperandio]

Thank you ManBha. Problem solved.

[Sunitha_Mod]

Hello @Sperandio, 

Excellent! 

We are glad to know the problem has been resolved.