Smart Array 4200 temporary disabled

[Buddy_3]

Hi all,

I just bought a used Compaq Proliant 6400R with Smart Aray 4200 controller.
The problem is when I reboot it, it showed this message:

1794-slot 5 Drive Array - Array Accelerator Battery Charge low.
Array Accelerator is temporarily disabled.
Array Accelerator will be reenabled when battery reaches full charge.

FYI, I have plugged this server's power supply in to the AC source for 1 night.

Anybody know what is the problem?

Thanks in advanced.

[Sunil Jerath · Accepted solution]

Hello Buddy,
Sometimes it takes longer than a day so it remain powered on. If you continue to receive the same error message then you would have to replace the controller unfortunately. The spare part no is 401859-001.

Regards,

[Michael Schulte zur Sur]

Hi,

if the battery does not load, you have two options, I think.
1. remove array accellerator
2. replace array accellerator

look here:
ftp://ftp.compaq.com/pub/supportinformation/techpubs/user_reference_guides/388777-002.pdf

greetings,

Michael

[Buddy_3]

Thanks guys.
The problem is solved.
I just need to let it be charged for more than 1 night (I thought it was enough).