ProLiant Servers (ML,DL,SL)
1748282 Members
4043 Online
108761 Solutions
New Discussion

Smart Array P410i Controller: Array Accelerator is disabled

 
SOLVED
Go to solution
vNabi
Occasional Contributor

Smart Array P410i Controller: Array Accelerator is disabled

I have a DL380 G7 server, with P410 controller and a 1GB cache module. 

I bought a SAS expander (468406-B21) and a new cage (516914-B21). I installed them with attention to cabling instruction. I powered on the server, I saw this POST message:POST Message.PNG

 

I found that cache module has been disabled. I updated the firmware using SPP G7.1 , but there is no change.

These are ADU screenshots:

1.PNG2.PNG3.PNG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 I the  ADU full reporti is here:

http://s000.tinyupload.com/index.php?file_id=68884460244949776100 

 

2 REPLIES 2
m_icha
HPE Pro

Re: Smart Array P410i Controller: Array Accelerator is disabled

Hello vNabi,

First of all thanks for being so detailed in your question! The installation of the SAS expander is not related with the error message you received. It is likely that p410i cache (FBWC) has encountered a failure, which caused the backup to fail. I would strongly recommend to capture an ADU report & along with the screenshot log a case to HPE support. Likelihood, the recommendation you will receive will be to replace the cache module. The replacement procedure is pretty straight forward process & normally has no negative side effects to your data.

m_icha

I'm an HPE Employee
Need assistance? Contact HPE Support
How to Say Thank You? Just click the KUDOS!
vNabi
Occasional Contributor
Solution

Re: Smart Array P410i Controller: Array Accelerator is disabled

Hello m_icha

Thanks for your advise, The cache module was failed. I replaced it with new one and the problem solved!