snmp INFORMATIONS ON DL20 gen)

[VALERIOBRUSTIA]

SNMP info from DL20 Gen9 server seems to be incomplete.

In particuar a Walk on the profile don't shows any info on:

Hard Drive status (on ML350 G6 was .1.3.6.1.4.1.232.3.2.5.1.1.6.2 )

Power supply status (on ML350 G6 was .1.3.6.1.4.1.232.6.2.9.3.1.4.0)

It seems to be a partial management of MIBS (in particular branch 1.3.6.1.4.1.232 is not present).

The standard MIBS reated to LAN status are instead correct (.1.3.6.1.2.1.2.2.1.8) 

[Alfinfrance]

Hi,

I have the same problem here also with a DL20. The power supply redundancy can't be supervised through SNMP (state is always 'other' whatever the power supply status are).

Do you have any solution to catch this error?