SNMP with iLO6 on ML350 G11

[servicetech57]

hello, I used to work with SNMP v1 requests to read the status of the smart array raid card. I was using "hp.ilo.cpq.da.condition" with the SNMP OID "1.3.6.1.4.1.232.3.1.3.0" for all my ML350 G10 servers, but with the ML350 G11 it no longer works.

what is the new SNMP OID for the new ML350 G11 servers?

I use SSD drives with the MR408i-o raid card in ilo6.

here is the only doc i found on the web : https://docs.vistanet.jp/about/supported-resources/templates-in-detail/hp-ilo-monitors/

hp.ilo.cpq.da.condition

Metric Details Metric Details Applicable for Device SNMP OID 1.3.6.1.4.1.232.3.1.3.0

Expression NULL

Description Monitors the overall condition (status) of the driver array.

Possible values ​​are 1- Other, 2- OK, 3- Degraded, 4- Failed. [OID: 1.3.6.1.4.1.232.3.1.3.0]

[Suman_1978]

Hi,

Does this help?
SNMP traps and Directory services schema.

Thank You!
I work with HPE but opinions expressed here are mine.

[servicetech57]

Hello, thanks a lot.

in the first document for ilo6, the only information for Smart Array status change is :

--------cpqDa6CntlrStatusChange 

033

13h

12h

Smart Array controller status change detected.------------

and I don't know how replace in my actual sequence for ilo5 : 1.3.6.1.4.1.232.3.1.3.0 ?

and i can't find the smart array's status change in your 2nd document :

hpqTarget
1.3.6.1.4.1.232.1001.1.1.1.1

hpqRole
1.3.6.1.4.1.232.1001.1.1.1.2

hpqPolicy
1.3.6.1.4.1.232.1001.1.1.1.3

hpqPolicyDN
1.3.6.1.4.1.232.1001.1.1.2.1

hpqRoleMembership
1.3.6.1.4.1.232.1001.1.1.2.2

hpqTargetMembership
1.3.6.1.4.1.232.1001.1.1.2.3

hpqRoleIPRestrictionDefault
1.3.6.1.4.1.232.1001.1.1.2.4

hpqRoleIPRestrictions
1.3.6.1.4.1.232.1001.1.1.2.5

hpqRoleTimeRestriction
1.3.6.1.4.1.232.1001.1.1.2.6

[servicetech57]

@Suman_1978 the SNMP traps are unchanged between ilo5 and ilo6

here is snmp traps for ilo5 :

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001040en_us&docLocale=en_US&page=GUID-950AD15D-F16B-41ED-B9DB-D7923A8CC3F8.html

for  : cpqDa6CntlrStatusChange

trap id , event class and event code are the same ...

but my sequence (wich works with ilo5) 1.3.6.1.4.1.232.3.1.3.0, doesn't work for ilo6.

[Suman_1978]

Hi,

I found this POST referring to SNMP and MR storage controller, check the solution.
If still need help, please contact HPE Support for further info on MIB/OID.

Thank You!
I work with HPE but opinions expressed here are mine.

[servicetech57]

hello, thanks for the link.

but the most of the links in your post are not available ...

[Mr_Techie]

@servicetech57 

I have gone through all above links, looks all working for me. Can you check again my friend?