HPE Community
ProLiant Servers (ML,DL,SL)
1832242 Members
2990 Online
110041 Solutions
New Discussion

Re: SPP 201409 will not boot into GUI from USB

 
SantokhB
Frequent Advisor

‎11-08-2014 10:47 AM

‎11-08-2014 10:47 AM

SPP 201409 will not boot into GUI from USB

Hello,

 

I have downloaded SPP201409 and created a USB stick with HPUSBKEY tool v1.8 that came with the kit. It will boot and display whether I want Automatic or Interactive and then display the HP logo whilst its loading and then it says Unbale to mount filesystem and give me the # prompt. Please see attached scrrenshot. I tried it on DL380pG8 and DL580G7 with same results.

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎11-09-2014 10:37 PM

‎11-09-2014 10:37 PM

Re: SPP 201409 will not boot into GUI from USB

I would compare md5 to ensure you have a good file downloaded.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
SantokhB
Frequent Advisor

‎11-11-2014 04:29 PM

‎11-11-2014 04:29 PM

Re: SPP 201409 will not boot into GUI from USB

Hi Thorsen

 

I have downloaded the file about 3 times now and even cut a CD and then created the USB from the CD ...same result. Has anyone out there got this to work. Most proliants these days come without CD drives so a USB is the only way to go.

 

Thanks

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.