ProLiant Servers (ML,DL,SL)
1757084 Members
2157 Online
108858 Solutions
New Discussion юеВ

Re: System ROMPaq Firmware for HP ProLiant DL380p Gen8 (P70) Servers

 
Zakour
Occasional Advisor

System ROMPaq Firmware for HP ProLiant DL380p Gen8 (P70) Servers

Good Day Experts

We recently upgraded the System ROM or BIOS firmware to the latest version recommended at the moment ( Version : 2018.05.21  released on 25 Jun 2018).

We noticed after the upgrade that the "Redundant System ROM" firmware was not changed to the same version as the "System ROM" firmware version and still contain an old version.

Our Questions are :

1- What's the recommended combinaision we should have for "System ROM" and it's "Redunandant System ROM" firmware versions ?

2- How do we update the "Redunandant System ROM" firmware ?

Looking to hear from you.

Thank you in advance

Mohamed ZAKOUR
https://www.linkedin.com/in/mzakour/
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: System ROMPaq Firmware for HP ProLiant DL380p Gen8 (P70) Servers

this is normal.
it is the previous installed version.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Cali
Honored Contributor

Re: System ROMPaq Firmware for HP ProLiant DL380p Gen8 (P70) Servers

The "Redunandant System ROM" is for failback, if your new Firmware Version makes trouble.

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.