Umable to attach u.2 backplane to a RAID controller on DL380 Gen10

[ITLearner1]

Hi

I have a DL380 Gen10 Server

Earlier i bought a u.2 backplane (826689-B21) + U.2 NVME enablement kit (873732-B21) and installed 8x3.84 TB U.2 Drives

and restarting the server: they are working well but i can't configure them to work as RAID (The drive are physically connected directly to the NVMe Riser) so how can i set them to work as RAID knowing that i Have a MR-416i-P RAID Controller (but i dont have the coorect cables to connect it directly to to the backplane)

Any Idea about how to solve the problem will be appreciated

Thanks in advance

[Suman_1978]

Hi,

If I check the 873732-B21, this is the cable part 875092-001
Please refer to the Cabling diagram for the above cable part number.

Thank You!
I work with HPE but opinions expressed here are mine.

[TVVJ]

Hello, 

Please refer to document "HPE ProLiant Cabling Matrix" and see if it helps.

Regards,

[Sunitha_Mod]

Hello @ITLearner1,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

[ITLearner1]

@Suman_1978 

Dear Suman, Hi

The 873732-B21 is the SLim SAS riser with its cables, they are connected correctly to the riser, so i can browse the through Windows but as separated disks, i want to configure them as RAID6, But i cant. I know the cabling diagram but there is no cables (in my case) connected to the RAID controller.

The question is: is there any cables that connect the backplane directly to the controller knowing that i have MR-416P Controller and it is suitable to use in my case.

Any Idea?

HPE learner

[Suman_1978]

Hi,

Other than the Cabling diagram, I have no idea about other connections.
Being a new server, can you contact HPE Support and get some help.

Thank You!
I work with HPE but opinions expressed here are mine.