Unable to enter ILO GUI after assigning ip

[zt2021]

Greeting,

recently we help client to setup a HP Proliant DL380 gen 10 server (running Window server 2019) and had been told current iLO 5 are share with NIC port 1. after few test we still unable to get into the iLO GUI.

thing that i had try:

1) remove teaming (bonding port) assign 1 port for internet/ LAN usage, another port for iLO. But iLO is not working and window svr is not allow 2 different IP and gateway in both NIC port

2) remove link aggregation in switch, assign back to normal access vlan

3) only using port 1, port 2 is disable. 

4) adding 2 IP in nic port 1,  SVR and iLO IP. 

i had attaced the iLO setting below

iLO 01

iLO 02 

is there any setting is miss out or wrong? any help will apprecited 

thank

[zt2021 · Accepted solution]

Problem had been solved.

i assign an ip on port 2, now can enter iLO GUI

so mean:

port 1 : Server IP

port 2 : iLO IP range

we had VLAN, but no need to add VLAN in iLO setting 

[Anu_K]

Glad to hear that your issue is resolved!