Array Config Util

[Patrick Giblin]

I have a stupid question.

I inherited a Cluster with 2 Proliant 6400R's fiber connected to a RAIDArray 4100. There are 2 identical Mirrors set up on 2 seperate arrays. I need to delete one of these arrays but I do not know which drive letter corresponds to which array. No documentation on the setup of the system is available.

Any assistance would be greatly appreciated.

Thanks!

Patrick G.

[Tarek Kawach]

Hi Patrick:


This is tricky; but each logical drive is one physical drive in windows disk management or disk administration.

Logical drive 1 = will be disk 0
Logical drive 2 = will be disk 1

etc ; ; disk management gives signiture to these drives. and then disk 0 can be partioned to c: d: etc.

also check if they are basic or dynamic if win2k.

Hope this helps.