how to remove "power on" password - DL380...

[foler prekrasni]

When server is restarting, I need to type power on password which is set in bios. Because of this windows cant boot-up to logon screen and folder shares is unavaiable...How I can remove power on password?

thanks

[Kedd Guyton]

On most ProLiant models a jumper change or DIP switch change will reset the password.

[CA650400]

And if you know it, you need to press F8 or F9 during booting time to access the BIOS setup. In the setup you can remove it (enable/disable).

[J_Moe]

If you know the password, while booting when it has requested for the password, enter the password followed by a forward slash i.e ( 123456/) then enter

[Greeshma21]

Hi @foler prekrasni ,

Please refer to this post, It might help you to resolve your issue.

Regards,
Greeshma

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics