HP ProLiant MicroServer Gen8 - RAID1 Configuration

[Blusion85]

Strange. I can't install the OS.

I get:

Load driver

A media driver your computer needs is missing. This could be a DVD, USB or hard disk driver. If you have a CD, DVD or USB flash drive with the driver on it, please insert it now.

Note: If the installation media for windows is in the DVD drive or on a USB drive, you can safely remove it for this step.

--

When I get this lovely server, I did the DVD rom on the correct port on the systemboard / motherboard.

EDIT:

I try to make the USB bootable and try to install the OS from there.

[Torsten.]

You likely need the driver because of the B120i controller. I would try intelligence provisioning.

[Blusion85]

OK, I will do it.

Need I go to configure and install or perform maintenance.  And If I need to go configure and install, need I de DVD where the OS on it for installation?

[Torsten.]

Configure and install. You need the DVD, because you need an install media.

google

"HP Intelligent Provisioning User Guide for
HP ProLiant Gen8 Servers"

for the user guide

[Blusion85]

OS is been installed on my server with RAID1. It works.

I want to say thanks for all the help that I've given from you'all.

And I write it down for the next time that I'm not forgotten, like what I said that  it was for me some years ago.

Many thanks!

Sincerley,

Blusion.