Installing LP2000r server with NetRaid under SCO Openserver 5.0.2

[Edeltraut Wunderlich]

Hi,
We have two new LP2000r servers with NetRaid and want them to install with sco openserver 5.0.2. On the Netserver Navigator CD isn??t any information about the lp2000r servers and such a diskarray. I start the installation with the sco boot disk and the use of btld link=amird ... After loading boot disk and btld amird driver disk the system hangs on section F of the hardware self test (last line which is displayed is: F dbtrinit)
Is there anyone who can help me on that problem.

thanks in advance
e. wunderlich

[Stuart Browne]

I think we'll start of with.. Are you sure it's an "LP2000r", and not an 'LC2000r' ?

I've used MegaRAID controllers (HP NetRAID) under SCO OpenServer 5.0.5/5.0.6 constantly over the last 3 years and have not had any major problems (give or take the NetRAID 4M).

What version of the driver are you currently using?

I beleive the NetServer Navigator currently only supplies 2.13 on the M04.00 CD (when the latest version is currently 2.14, available from http://megaraid.lsilogic.com/support/dlcenter/Sco_Unix_214.zip).

What other controllers/devices are you currently using in the machine? And can you show the exact boot: string you are supplying to the OS?

[CA760382]

Hi,

I think for LP2000r with NetRaid-2M the amird Driver must have Version: 2.13-11

We have some LC2000 with NetRaid 1M and this Driver works. The Version 2.10 dosn't work.