Interlock error

[WMihalik]

I've got a Proliant 6500 I've inherited from a colleague who has since moved away. The server worked when I got it, it was then changed from a rack mount to a stand alone and since then I've had misc interlock error.

Problem is, I can't see where the problem is. All the cables are accounted for, all the system boards have been removed and replaced and there's still an interlock error.

If I ask my friend he says something about "micro-switches" along the chassis that might have been flipped when it was changed and they need to be flipped back.

Any suggestions?

[Robin_37]

Hi

Please check the attachment

Regards
Robin

[WMihalik]

Thanks for the attachment, but I knew that already.

I know it's an interlock error dealing with a misc. cable but all cables are accounted for and connected.

The person that owned it before is talking about "micro-switches" and how during the conversion betweem rack-mount and floor-mount some of these might have been disturbed.

Thank you.

[Robin_37]

According to my knowledge the following switch settings are available in the PL6500 pentium pro board,

System Maintenance Switch
Internal/External Battery Switch
Hot Spare Boot Switch
Processor Board - SW3
Processor Board - SW4 & SW5
System InterLock Switches

And in the pentium Xeon the following

Processor Core Frequency Switches
Maintenance Configuration Switches (SW1)
System InterLock Switches



Regards