LH3r mounting screw size?

[David Holbrook]

I need to rack mount my NetServer LH3r systems, but can not find any information on the size for the six mounting screws used to secure the slide rails to the LH3r chassis. Are these screws 6x32? I know the mounting kit (if it was available) had Torx screws T-15, but I do not know the correct size. Also, does anyone have a source for the HP slide mount rail kit? Thanks, David

[CA1058261]

David,
The shoulder screws that your referring to are 8-32 with a T15 head. These screws are specific to HP servers and it's very unlikely that you will find a supplier for them.

There is a very good alternative to the HP Slide Mail Rail Kit that your interested in. Please review the information for the Fixed Rail Product on the following site:

Fixed Rack Mount Server Rails
http://www.racksolutions.com/rails-server-rack-mount-fixed.shtml

Additional information on installing HP servers and equipment can be found at:

http://www.racksolutions.com/hp

If you have any questions please don't hesitate to contact me.

Will Beene
903.454.1978 x213
Will@Racksolutions.com
www.RackSolutions.com