HPE Community
ProLiant Servers - Netservers
1847260 Members
4139 Online
110263 Solutions
New Discussion

Re: Microserver Gen10 Display flickers

 
JanneSe
Visitor

‎09-27-2022 11:01 PM - last edited on ‎09-29-2022 02:59 AM by

‎09-27-2022 11:01 PM - last edited on ‎09-29-2022 02:59 AM by

Microserver Gen10 Display flickers

I have a screen connected to Microserver's displayport (without adapters).  Very often the screen starts to lose connection to computer and then turns back on in a few seconds frequency. This flickering may stop after a while or not (reboot usually helps). I have also tried another monitor and another cable without success. 

OS is Server 2019 Essentials. Matrox driver is installed from HPE support page.

0 Kudos
Reply
2 REPLIES 2
TVVJ
HPE Pro

‎09-28-2022 08:12 AM

‎09-28-2022 08:12 AM

Re: Microserver Gen10 Display flickers

Hello,

As you have already swapped the monitor and the cables connecting to the server's check if the issue is present when the server is in RBSU mode. Restart the server and press key 'F9' during POST to launch it and check.

Regards,



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[All opinions expressed here are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
0 Kudos
Reply
JanneSe
Visitor

‎09-30-2022 05:14 AM

‎09-30-2022 05:14 AM

Re: Microserver Gen10 Display flickers

Currently the displayport is totally dead. I made a support ticket and the server will be replaced. 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.