NetRAID 4M Array Reconfiguration Failed

[System Admin_2]

I have a RAID-10 array on (12) 18GB drives. One logical disk occupies 50.8 GB (Exactly 1/2 capacity). When I try to reconfigure the array to use only 6 drives leaving the logical disk to occupy 100% capacity, the reconfiguration operation failes with a "Resource Conflict" error message in the NetRAID 4M FAST software. There is not additional information provided by the software except a suggestion to submit a problem report.

Any insight here would be appreciated.

[CA660377]

removing the 6 HDD will remove the redundancy. About the only thing I can suggest is to make sure you are using the latest f/w, drivers and fast utlity when using this controller. You can find the updates here:

http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix51934en_US.html