ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

NetRaid will not recognize drives.

 
Highlighted
New Member

NetRaid will not recognize drives.

I recently picked up a LH Pro 6/200.
It contains a single PPro 200, 96 Meg of ram and 3 - 4.2G Quantum HD's.

The problem is that the netraid card does not seem to see the drives. If I connect the drive cage to the onboard adaptec, it indicates the drives are available, but the netraid card never shows them. I have tried all three ports of the netraid. I ahve verified the switch settings. The ID's are set for 1,2,3,4,5,6. Upper and lower cage settings are correct.

I have reset the netraid to defaults, and tried several settings to no avail. If I put the SCSI cdrom on the netraid, it shows up as ID 5. The card must work, but never sees the drives.

I have tried all 3 drives as singles and several combinations of drives/slots. Nothing changes.

Any help on this would be appreciated.

Thanks in advance,
Bill