Netserver LH3 raid array recovery

[Kenny Yeung]

We have lost our nvram configuration and raid disk configuration on our Netserver LH3 (PII 450mhz). Server boots up with no NOS detected. Is there any way we can have the server recover without reinstall NOS? Should I run the consistency check? Any help will be appreciate.

[BR122104]

Hello Kenny,


A possible solution is to reconfigure the array controller exactly as it had been configured in the past. After configuration, do not initialize and attempt to boot off the configured logical disk.

Alternatively, if you don't have the NetRAID configuration parameters, you could opt to reconfigure the array to your liking, reinstall a basic version of the OS and do a restore...

I hope this helps.


Erwin