Netserver LPR Boot Errors

[Bill Burke_1]

When I boot this server I get the following error

0080-51 : Netserver Management ControllersFailure

0090-64 : DIMM management failure

I tried to update the bios but it fails. Heard a patch exists for this but cannot find it.

[CA660377]

Bill, reply with an email address that accepts exe files, or leave instructions if it doesn't, and I will email you the fix.

[Bill Burke_1]

You can email me at wpburke@ofsoptics.com

[CA660377]

It's on it's way.

[Rob Wilson]

Hi,
same problem - email rwilson@auctionon.com

[CA660377]

Sent

[BR703355]

It must be doing the rounds, I've got exactly the same problem. Email: itsystems@fomltd.com Many thanks

[CA660377]

I sent it.

[BR703355]

Thank you. Well worth 10 points.

[Steffen Jaiser]

Looks like I could use the patch too:
jaiser@s-u-p.com
Thanks.

[CA660377]

While I don't mind sending this out, I ask that you make a new thread and assign points. The file is on it's way.

[Gokben]

same problem
can you help me too
thanks
gbaysan@gloria.com.tr

[Nicolas_8]

Got the same problem. Need the fix please.

nnoel@alis.com

Thanks

[CA660377]

I am no longer aloud to send this file out. If you have the 0080 0090 errors, please call HP support.

[Moi_5]

Really happy top hear that HP does not send fixes for his mistakes any more !

very smart and helpfull :-(

[D.K.]

to resolve this issue you need 2 things.

1) Dos bootable diskette
2) newest revision of the BIOS for the Netserver LPr that is available on the HP website. (rev 4.06.35 PR)

boot to DOS diskette.
at command prompt switch to BIOS diskette (previously created) and run following commands;

flashmmc lprra_us.bin

wait for command prompt to appear and then run the following;

sdredit -w -f list_lpr.sdr

again wait for command prompt to reappear and reboot to the BIOS diskette.

re run BIOS update.

reboot.

this should take care of the issue.

[CA1320915]

Same problem as the others, but with a twist.

I run the flashmmc but the prompt never comes back.

[Sandhya_1]

Hi Peter,

Welcome to the Forums.

It's more likely that you'll get an answer if you could post your query in a new thread.To start a new thread, select the subject category where you want post your query:

http://forums1.itrc.hp.com/service/forums/bizsupport/home.do?forumId=2

Click on "start new thread" button on the page and post your query.

Good luck.

Best Regards,
Sandhya

[CA1361829]

OK. I have tried everything including the dip switches. When I try and update the bios I get the 'sdredit.exe failed'.

I would greatly appreciate a fix if anyone has some special file please send this to me.

Namaste,

scott@technicalenlightenment.com