Netserver LPR Error messages

[Jack Mays]

I am getting these error messages when I reboot the server. I press F1 and it will finish booting. I think I will need to fix this before the server dies.

0080-51 Netserver Management Controller Selftest failure

0090-64 Dimm Management failure

The temp led and the fan led went out today. the fan is working but I do not think this server is long for this world if I do not fix these issues soon.

Only prob is I am not that familiar with HP Netservers. Anybody care to lend a hand?

Thanks
Jack

[CA806954]

UPDATA YOUR BIOS USE NG M 04.05

[CA660377 · Accepted solution]

This is a known issue with the LPr and can be fixed with a flash. Leave an email address and I will send you the flash with instructions.

[Antonio_42]

I had this problem before and I remember running an MMC upgrade (lpr-mmc.zip) and then a BIOS upgrade (lpr_bios35_fw04_en.exe) However I missplaced the first
file lpr-mmc.zip. Can anyone send it to me? I need to run it again on a different server...

Thanks,

Antonio

[Yusuf_3]

Hi

I have same problem you have.
pl can you email me the fix

My email address is yibrahim@medcard.com.

thank you very much

[Robert Cook_3]

I also Need the MMC Flash update

briancook-public@mailblocks.com
Thanks

[amhakassa]

Hi jack,

The following instructions are most likely to solve the issue

1. Creat a DOS 6.22 Boot floppy (also available www.Bootdisk.com)
2.download the latest BIOS from this link
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=18328&taskId=135&prodTypeId=15351&prodSeriesId=50457〈=en&cc=us&swEnvOID=54#326
Creat a bootable disk by doubl clicking the downloaded BIOS file
3.Boot from the DOS 6.22 boot floppy
4.take the DOS 6.22 Disk out and switch it with the BIOS diskette
5.Run the following files from the BIOS diskette in the following order;

flashmmc lprra_us.bin
(The process is a background process so you won't see any interactive screen. You wait until you get the DOS propmt (A:\>) back

sdredit -w -f list_lpr.sdr

Follow the instruction
6.Reboot the server with the BIOS diskette still in the floppy disk drive and follow the on screen instruction

7. on the next reboot get in to BIOS setup by pressing F2 and save the default settings (If you have any custom setting make sure you have the BIOS setup as it was before) then Press F10 to save and Exit

This should solve the problem

Regards
Amha Kassa

[K. Max Wippich]

Im also looking for an MMC upgrade (lpr-mmc.zip) and then a BIOS upgrade (lpr_bios35_fw04_en.exe) for the netserver LH3, my email is wallyboy13@hotmail.com
Thanks, I appreciate it!!!

[amhakassa]

Hi K. Max

The Lpr MMC is included in the download in the link I sent you on my previous post

For the LH3 BIOS (it includes the MMC file too) the link is
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locale=en_US〈=English&pnameOID=15389&prodSeriesId=50448&prodTypeId=15351&basePartNum=ns769&locBasepartNum=ns769en&os=Cross+OS&tech=BIOS

Good Luck
Amha Kassa