HPE Community
ProLiant Servers (ML,DL,SL)
1826777 Members
1495 Online
109702 Solutions
New Discussion

Who Me Too'd this topic

cwolfe
New Member

‎04-18-2013 04:54 PM

‎04-18-2013 04:54 PM

Can't update firmware ML310e g8

Folks,

 

I just purchased a Proliant ML310e g8 and am a newbi to HP land.  I've tried several times to use IP to update the firmware which indicates that several componets need an upgrade.  When I start the process, something takes a long time to down load and then there is a long time checking the hardware.  I get the list of components to update and one is preselected.  When I then initiale the update, I quickly get a pop up window with a red circle with x.  If I select one of the components that was not selected, I again get a pop up with the dreaded circle with x.

 

Any suggestion on what I'm doing wrong or have not configured.  I've checked the iLO configuration several times and it seems ok.

 

Thanks

1 person had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.