HPE Community
BladeSystem - General
1754289 Members
3037 Online
108813 Solutions
New Discussion

Who Me Too'd this topic

pons_freebsd
Occasional Contributor

‎02-13-2014 04:11 AM

‎02-13-2014 04:11 AM

C7000

I am in the process of getting HP BladeSystem c7000 Enclosure
Management - Dual Redundant Onboard Administrator management modules
Network Module Two HP 6120XG Blade Switches for HP c-Class BladeSystem; each
configured with:
- 16 x 10Gb downlinks to server NICs
- 8 x 10Gb SFP+ uplinks (including a dual personality CX4 and SFP+ 10G (unpopulated) uplink, and two 10Gb cross-connects)
 
SAN Module Two Brocade 8Gb SAN Switches for HP c-Class BladeSystem; each
configured with:
- 24 ports enabled (16 internal, 8 external)
- 8 x Shortwave 8Gb SFP+ Transceivers
- 8 x LC-LC OM4 Fiber Cables, 15m
- Full fabric connectivity
Power and Cooling 􀂃 HP BLc7000 Single Phase Power Module
- Ten Active Cooling Fans
- Six Redundant Hot Plug Power Supplies
- The power supplies and cooling fans are installed directly into the chassisand are designed to provide redundant cooling and power for a fully configured enclosure
 
Can you please adivise about the roadmap of the Blade, are there known issues if the blade will discontinue in the next few years...
 
pons
1 person had this problem.
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.