HPE Community
HPE Aruba Networking & ProVision-based
1827025 Members
2737 Online
109713 Solutions
New Discussion

Who Me Too'd this topic

Mario2014
Occasional Contributor

‎05-27-2014 10:01 AM

‎05-27-2014 10:01 AM

pxe boot

Hi,

 

I have a HP Procurve 5412zl acting as my gateway and I have multiple HP procurve 2810 (Client) and Procurve 3800 (Servers) uplink to it. I am trying to pass pxe traffic and it's not working. I have no problem on the same subnet.

 

Client - 2810

vlan 1
   name "DEFAULT_VLAN"
   untagged 1-46,Trk1
   ip address 172.20.0.222 255.255.252.0
   qos priority 7
   ip igmp
   exit

 

Servers - 3800

vlan 8
   name "Server"
   tagged Trk1
   untagged 1/7-1/21,1/24,2/7-2/21,2/24,Trk2-Trk5
   ip helper-address 172.20.8.11
   no ip address
   exit

 

5412zl - Gateway

vlan 8
   name "Server"
   tagged A17,Trk13
   untagged A7-A9,A11-A12,A14,B11,D17-D18,Trk12,Trk14
   ip address 172.20.8.1 255.255.255.0
   exit

 

Thank you

 

  

1 person had this problem.
0 Kudos
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.