HPE Community
HPE Aruba Networking & ProVision-based
1825791 Members
2417 Online
109687 Solutions
New Discussion

Who Me Too'd this topic

colly72
Occasional Advisor

‎02-25-2016 02:46 AM

‎02-25-2016 02:46 AM

HP 5500 HI IRF

Hi all,

I've got 2 HP 5500 HI switches that I'm trying to connect with IRF, with one pair of 10Gbe SFP+ transceivers connected with a fibre cable.  I've followed all the guides I can find and have set it up as I think it should be but when I connect the 2 switches, they initially show IRF port as up before failing with a heartbeat timeout message.  I've made sure the switches are on the same firmware.  Here's my config for the master switch:

#
version 5.20.99, Release 5501P20
#
sysname HP
#
dhcp relay server-group 1 ip 10.1.0.149
#
irf mac-address persistent timer
irf auto-update enable
undo irf link-delay
irf member 1 priority 32
#
domain default enable system
#
telnet server enable
#
password-recovery enable
#
acl number 2000
rule 0 deny source 172.16.28.0 0.0.3.255
#
acl number 3001
hardware-count enable
rule 0 deny ip source 172.16.28.0 0.0.3.255 destination 192.168.10.0 0.0.0.255
rule 5 deny icmp source 172.16.28.0 0.0.3.255 destination 192.168.10.0 0.0.0.255
rule 10 permit ip
#
vlan 1
#
vlan 10
description Accounts
#
vlan 20
description Servers
#
vlan 30
description Curriculum
#
vlan 40
description Printers
#
vlan 60
description IT Admin
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
user-group system
group-attribute allow-guest
#
local-user admin
password cipher $c$3$1Q8Fu74tA+WUcpcTGeKWn2/UizAb4H3k7Q==
authorization-attribute level 3
service-type telnet
service-type web
#
cwmp
undo cwmp enable
#
interface NULL0
#
interface Vlan-interface1
ip address 10.1.3.67 255.255.0.0
#
interface Vlan-interface10
ip address 192.168.10.1 255.255.255.0
dhcp select relay
dhcp relay server-select 1
packet-filter 3001 inbound
#
interface Vlan-interface20
ip address 192.168.20.1 255.255.255.0
dhcp select relay
dhcp relay server-select 1
#
interface Vlan-interface30
ip address 172.16.28.1 255.255.252.0
dhcp select relay
dhcp relay server-select 1
packet-filter 3001 inbound
#
interface Vlan-interface40
ip address 192.168.40.1 255.255.255.0
dhcp select relay
dhcp relay server-select 1
#
interface Vlan-interface60
ip address 192.168.60.1 255.255.255.0
dhcp select relay
dhcp relay server-select 1
#
interface GigabitEthernet1/0/1
port link-mode bridge
#
interface GigabitEthernet1/0/2
port link-mode bridge
#
interface GigabitEthernet1/0/3
port link-mode bridge
#
interface GigabitEthernet1/0/4
port link-mode bridge
#
interface GigabitEthernet1/0/5
port link-mode bridge
#
interface GigabitEthernet1/0/6
port link-mode bridge
#
interface GigabitEthernet1/0/7
port link-mode bridge
#
interface GigabitEthernet1/0/8
port link-mode bridge
#
interface GigabitEthernet1/0/9
port link-mode bridge
#
interface GigabitEthernet1/0/10
port link-mode bridge
#
interface GigabitEthernet1/0/11
port link-mode bridge
#
interface GigabitEthernet1/0/12
port link-mode bridge
#
interface GigabitEthernet1/0/13
port link-mode bridge
#
interface GigabitEthernet1/0/14
port link-mode bridge
#
interface GigabitEthernet1/0/15
port link-mode bridge
#
interface GigabitEthernet1/0/16
port link-mode bridge
#
interface GigabitEthernet1/0/17
port link-mode bridge
#
interface GigabitEthernet1/0/18
port link-mode bridge
#
interface GigabitEthernet1/0/19
port link-mode bridge
#
interface GigabitEthernet1/0/20
port link-mode bridge
#
interface GigabitEthernet1/0/21
port link-mode bridge
#
interface GigabitEthernet1/0/22
port link-mode bridge
#
interface GigabitEthernet1/0/23
port link-mode bridge
#
interface GigabitEthernet1/0/24
port link-mode bridge
#
interface GigabitEthernet1/0/25
port link-mode bridge
#
interface GigabitEthernet1/0/26
port link-mode bridge
#
interface GigabitEthernet1/0/27
port link-mode bridge
#
interface GigabitEthernet1/0/28
port link-mode bridge
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/30
port link-mode bridge
#
interface Ten-GigabitEthernet1/0/29
#
ip route-static 0.0.0.0 0.0.0.0 10.1.10.2
#
dhcp enable
#
ssh server enable
#
load xml-configuration
#
load tr069-configuration
#
user-interface aux 0
user-interface vty 0 15
#
irf-port 1/1
port group interface Ten-GigabitEthernet1/0/29 mode enhanced
#
return

 

 

Here's the config on the slave switch:

#
version 5.20.99, Release 5501P20
#
sysname HP
#
irf mac-address persistent timer
irf auto-update enable
undo irf link-delay
#
domain default enable system
#
password-recovery enable
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
user-group system
group-attribute allow-guest
#
local-user admin
password cipher $c$3$mAOPzI066QeH3djBbCybHk3DyaQ8SSo5TA==
authorization-attribute level 3
service-type telnet
service-type web
#
cwmp
undo cwmp enable
#
interface NULL0
#
interface Vlan-interface1
ip address 10.1.3.75 255.255.0.0
#
interface GigabitEthernet2/0/1
port link-mode bridge
#
interface GigabitEthernet2/0/2
port link-mode bridge
#
interface GigabitEthernet2/0/3
port link-mode bridge
#
interface GigabitEthernet2/0/4
port link-mode bridge
#
interface GigabitEthernet2/0/5
port link-mode bridge
#
interface GigabitEthernet2/0/6
port link-mode bridge
#
interface GigabitEthernet2/0/7
port link-mode bridge
#
interface GigabitEthernet2/0/8
port link-mode bridge
#
interface GigabitEthernet2/0/9
port link-mode bridge
#
interface GigabitEthernet2/0/10
port link-mode bridge
#
interface GigabitEthernet2/0/11
port link-mode bridge
#
interface GigabitEthernet2/0/12
port link-mode bridge
#
interface GigabitEthernet2/0/13
port link-mode bridge
#
interface GigabitEthernet2/0/14
port link-mode bridge
#
interface GigabitEthernet2/0/15
port link-mode bridge
#
interface GigabitEthernet2/0/16
port link-mode bridge
#
interface GigabitEthernet2/0/17
port link-mode bridge
#
interface GigabitEthernet2/0/18
port link-mode bridge
#
interface GigabitEthernet2/0/19
port link-mode bridge
#
interface GigabitEthernet2/0/20
port link-mode bridge
#
interface GigabitEthernet2/0/21
port link-mode bridge
#
interface GigabitEthernet2/0/22
port link-mode bridge
#
interface GigabitEthernet2/0/23
port link-mode bridge
#
interface GigabitEthernet2/0/24
port link-mode bridge
#
interface GigabitEthernet2/0/25
port link-mode bridge
#
interface GigabitEthernet2/0/26
port link-mode bridge
#
interface GigabitEthernet2/0/27
port link-mode bridge
#
interface GigabitEthernet2/0/28
port link-mode bridge
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet2/0/29
port link-mode bridge
#
interface Ten-GigabitEthernet2/0/30
#
load xml-configuration
#
load tr069-configuration
#
user-interface aux 1
user-interface vty 0 15
#
irf-port 2/1
port group interface Ten-GigabitEthernet2/0/30 mode enhanced
#
return

I can't work out what it is that I'm doing wrong.  Can anyone help?

 

Thanks in advance

1 person had this problem.
0 Kudos
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.