HPE Community
Comware Based
1855680 Members
2702 Online
104103 Solutions
New Discussion

Who Me Too'd this topic

netJohn
Occasional Visitor

‎03-22-2018 06:46 AM

‎03-22-2018 06:46 AM

VSR1000 and bridge-aggregation

Hello,

I am pretty new to comware OS and have a VSR1000 running in GNS3 to do some POC and testing. It might not be the most used scenarion, but I wanted to do a interface bridge-aggregation config since we use this on the switches in production. I am starting to believe I am blind or it's not supported.

I can define the interface fine;

#
interface Bridge-Aggregation2
 description D2-dist-sw01
 port link-type trunk
 port trunk permit vlan 1
 link-aggregation mode dynamic
#

But I just can't find a way to add the port to the brdige group. It seems quite clear that the command should have been "port link-aggregation group 2", but it does not come up as an optoin on the interface. I have no problem setting up a L3 route aggregation group and assign the port to it when I change gi 2/0 to "port link-mode route".

 

[F2DC-core-sw01]display current-configuration interface gi 2/0
#
interface GigabitEthernet2/0
 port link-mode bridge
 port link-type trunk
 port trunk permit vlan 1
#
return
[F2DC-core-sw01]interface GigabitEthernet2/0
[F2DC-core-sw01-GigabitEthernet2/0]port ?
  access        Set access port attributes
  hybrid        Set hybrid port attributes
  link-mode     Switch the specified interface to layer2 or layer3 ethernet
  link-type     Set the link type
  monitor-link  Monitor Link module
  trunk         Set trunk port attributes

[F2DC-core-sw01-GigabitEthernet2/0]

Anyone who can help me out here?

[F2DC-core-sw01]display version
HPE Comware Software, Version 7.1.059, Release R0327L01
Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP
HPE VSR1000 uptime is 0 weeks, 0 days, 3 hours, 44 minutes
Last reboot reason : Power on
Boot image: flash:/VSR1000-CMW710-BOOT-R0327L01-X64.bin
Boot image version: 7.1.059P06, Release R0327L01
  Compiled Jul 31 2017 16:00:00
System image: flash:/VSR1000-CMW710-SYSTEM-R0327L01-X64.bin
System image version: 7.1.059, Release R0327L01
  Compiled Jul 31 2017 16:00:00

CPU ID: 0x01000101, vCPUs: Total 1, Available 1
1.00G bytes RAM Memory
Basic    BootWare Version:  1.11
Extended BootWare Version:  1.11

 

2 people had this problem.
0 Kudos
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.