HPE Community
Web and Unmanaged
1825727 Members
2557 Online
109687 Solutions
New Discussion

Who Me Too'd this topic

parkam
Occasional Collector

‎01-20-2019 01:18 PM - edited ‎01-22-2019 10:22 AM

‎01-20-2019 01:18 PM - edited ‎01-22-2019 10:22 AM

HPE Officeconnect 1820-24g - having problems connecting to another switch while using vlans

Hi,

On the HPE 1820-24g I have the following connected ports:

1-12 PC and printers

21 - Connects to a Dlink dgs-1210-48(where another 30 pc are connected)

23 - Connects to a pfsense pc

Using only the default vlan(id=1) everything works with no problem.

In pfsense I've created a new vlan(id=30) and want to connect some pc on the hpe and dlink switch to his vlan.

On both switches I´ve created the vlan with id 30(vlan30).

 

On the hpe-1820-24g :

  • on port 13 vlan30 as untagged and vlan1 as excluded(port vlan id = 30). 
  • on port 23 vlan30 as tagged, and vlan 1 as untagged(port vlan id = 1)
  • on port 21 vlan30, vlan1 as tagged(port vlan id = none)

A pc connected to port 13 gets its correct vlan ip via dhcp from pfsense(port 23)

The pcs connected thru port 21 which are also vlan30 don´t get and IP address while pcs on  vlan1 do. The port on the dlink which connects to the hpe also have vlan1 and vlan30 tagged.

This is the first time using vlans, am I missing some configuration on the HPE 1820-24g? Is there any way to know that the vlan30 tag from the dlink switch is coming through to the HPE switch?

edit:changed port 30 to port 13

1 person had this problem.
0 Kudos
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.