HPE Community
HPE Synergy
1825051 Members
3491 Online
109678 Solutions
New Discussion

Who Me Too'd this topic

dehpe2022
Regular Visitor

‎06-21-2022 08:22 AM - last edited on ‎06-22-2022 01:15 AM by

‎06-21-2022 08:22 AM - last edited on ‎06-22-2022 01:15 AM by

CPLD firmware update on composer2

Trying to get back dead composer2, which couldn't be powered on.

All the sympthoms are loking as described here:

https://support.hpe.com/hpesc/public/docDisplay?docId=a00121316en_us&docLocale=en_US

Current OneView version was 6.50, so i decided to update via OneView.

The appliance state displays "Not connected to standby", so i used the "Remove standby" option as suggested and then uploaded HPE_Synergy_Composer2_CPLD_Firmware_Z7550-97383.bin

Update was successful, but only on active composer. The other composer was not updated, even in activity log i can't see nothing about it.

At this moment, i have two composers, all of them has ip addresses, i can login at each of them thru ilo, but can't power on the second one. I even couldn't confirm it was updated to CPLD version 0x12(A), because it has no power.

In the maintenance console i can only see the active composer, that is already updated.

When i'm tryig to reach maintenance console of the second composer, putty, as expected, can't connect to it.

Moreover, we have two independent synergy domains, in the second domain both two composers are dead. I planned to physically move those composers to the freame of the first domain and try to update and resore it there, but until i'm figured out how to proper restore standby composer in this domain, im' stuck.

 

Any suggestions?

2 people had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.