Server Management (Insight Manager 7)
1833016 Members
2248 Online
110048 Solutions
New Discussion

cqmghost use 100% processor

 
Ayman Altounji
Valued Contributor

cqmghost use 100% processor

Hi,

cqmghost use 100% of my processor time !!!!!
why ???

during 5 minutes it use 100%, after nothing for 2 minutes, and then 100% for 5 min...

thanks !
5 REPLIES 5
Ayman Altounji
Valued Contributor

Re: cqmghost use 100% processor

Please post the version you are using. We have seen similar problems with alder agents.
Ayman Altounji
Valued Contributor

Re: cqmghost use 100% processor

What version of Insight Manager? What service pack is NT at?
Ayman Altounji
Valued Contributor

Re: cqmghost use 100% processor

Insight manager is the version 4.80
the compaq fundation agent is the version 4.9
and my NT has the SP6a (it's a small business server 4.5 version)
Bernard Čokorilo
New Member

Re: cqmghost use 100% processor

I am having a similar problem,the cpu is non-stop on 100% and I am also having trouble with cqmghost.exe(memory trouble)

Due to those problems I am getting an error that some services cannot start because there
is not enough resorces.
(some Microsoft Exchange services and a Web Client)

I also don't know why Windows detect only 24Gb of hard drive instead 70Gb(X:) and 70Gb(Y:).

I have a Proliant ML350 G3, 1.2Gb RAM, 2x70Gb hard drive my operating system is Windows server 2003.
(I am not sure what versions are my Insight manager and compaq fundation agent. But I will send you a post as soon as I will be able).

Meanwhile, could you please see into my problem. ;-(

Thank You! :-)

Sorry my english isn't very good.
Prashant (I am Back)
Honored Contributor

Re: cqmghost use 100% processor

hi Bernard Ä okorilo,

As per you hdd problem with the space install acu on you server( i suppose you are using the raid ).The ACU help you to check what is the status of you drive and where is you space. One more thing if it is unsed we can configure usig acu. This practise can be done online without any problem.

Where are rgarding the
a steady increase in the CPU utilization of the Insight Manager Foundation Agent (CQMGHOST.EXE).

Check this out this will tell you why is it happening. See the listed below HP Doc NO
DOCUMENT NUMBER: EM030402_CW01 REVISION: 0

folowed on following link
http://wwss1pro.compaq.com/support/reference_library/viewdocument.asp?source=EM030402_CW01.xml&dt=3

This is for Support Forum User also.As he is facing the same problem.

In case still problem presist post me on indianvb@yahoo.co.in Because i usually donot check this forum

Regards,
Prashant S
Nothing is impossible