HPE Community
Server Management (Insight Manager 7)
1833777 Members
2655 Online
110063 Solutions
New Discussion

Tape Drive Appears Red

 
Ayman Altounji
Valued Contributor

‎10-01-2001 04:00 PM

‎10-01-2001 04:00 PM

Tape Drive Appears Red

My Server appears red with a Failed status and if I drill down it point to my Compaq 10/20 DLT tape drive. Firmware version is 9F26. There are no tape read or write errors. I ran the cleaning kit 4 times as suggested by someone from COmpaq. The status of the drive is Removed - was OK.
Do you have any ideas on how I can make this status to normal.

Thanks
0 Kudos
1 REPLY 1
Ayman Altounji
Valued Contributor

‎06-04-2002 04:00 PM

‎06-04-2002 04:00 PM

Re: Tape Drive Appears Red

Having same problem with a Dat 4/8 in a Proliant 1200. os=Netware 4.11 Backupsoftware= Arcserve 6.10

//Fredrik
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.