HPE Community
Server Management (Insight Manager 7)
1755839 Members
4665 Online
108838 Solutions
New Discussion юеВ

Re: W2k assisted installation with SST5.0 only create a 4 GB startpartition

 
SOLVED
Go to solution
DTS IT
Occasional Contributor

тАО02-13-2003 01:45 PM

тАО02-13-2003 01:45 PM

W2k assisted installation with SST5.0 only create a 4 GB startpartition

We installed 2 DL580 (G1, 900MHz) with SmartStart 5.0 and an assisted installation. For filesystem we selected NTFS and a size of 8GB. After installation we noticed that SmartStart created a FAT 4 GB drive. After we cleaned the system again with SystemEraser and tried it again with the same result.

Is SmartStart not able to create a 8GB NTFS partition as startdrive ?
Why I have the possibility to select these values if the software can not handle it ?
0 Kudos
2 REPLIES 2
Frans Brouwer
Advisor

тАО02-15-2003 08:53 AM

тАО02-15-2003 08:53 AM

Re: W2k assisted installation with SST5.0 only create a 4 GB startpartition

as far as i know this is the reason why i never use assisted install, a 4 GB partition is far to small now adays
0 Kudos
Gert Luyten
Respected Contributor

тАО02-16-2003 06:05 AM

тАО02-16-2003 06:05 AM

Solution

Re: W2k assisted installation with SST5.0 only create a 4 GB startpartition

Smartstart can handle NTFS partitions larger than 4GB, but you are using a really 'old' version.

Try 5.50 or even better the 6.x series. With the new Smartstart 6, you only require one reboot. Unfortunately, your server is not supported by this version, so stick with 5.50!

Rgds,

Gert Luyten.
A Proliant a day keeps the competition away!
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.