Server Management - Remote Server Management
1748122 Members
3414 Online
108758 Solutions
New Discussion юеВ

Configuring iLO2 with HPONCFG xml

 
SOLVED
Go to solution
WFHC-WI
Honored Contributor

Configuring iLO2 with HPONCFG xml

Hello all, and thanks in advance for any help you can offer.

I am working on an XML to use with HPONCFG that would allow me to configure all of my iLO 2 processors with rapid deployment pack.

I looked at the documentation on iLO processor scripting with regards to the SESSION_TIMEOUT setting located within the MOD_GLOBAL_SETTINGS set of instructions. The documentation lists valid values as either 15,30,60, or 120. I would prefer to disable the session timeout altogether; is there a setting or a separate command that accomplishes this for me?

-Jamie
3 REPLIES 3
barnett chan
Trusted Contributor
Solution

Re: Configuring iLO2 with HPONCFG xml

With iLO2 1.30 and later, there is a infinity timeout option.

You may download the latest 'HP Lights-Out xml Sample scripts' at http://h18000.www1.hp.com/support/files/server/us/locate/69_5561.html, and use the Mod_Global_Settings.xml. Change the Session Timeout to 0. ""
WFHC-WI
Honored Contributor

Re: Configuring iLO2 with HPONCFG xml

I thought I had the latest version of the iLO scripting document but I was wrong.

Broken link BTW, check out:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294268/c00294268.pdf

for the newest version.


Thanks for the help!
WFHC-WI
Honored Contributor

Re: Configuring iLO2 with HPONCFG xml

The current revisions allow an indefinite timeout as detailed in the user guide.