Disable IPMI over LAN via hponcfg?

[André Schneickert]

Hello,

is it possible to disable IPMI over LAN in ILO2/3/4 boards via hponcfg?

Regards,

André

[Oscar A. Perez · Accepted solution]

Currently, it can be disabled in iLO3 and iLO4 using the below XML script. For iLO2, we are going to have to spin another release to include this XML tag and to allow IPMI over LAN to be disabled on Blades.

<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_GLOBAL_SETTINGS>
<IPMI_DCMI_OVER_LAN_ENABLED VALUE="No"/>
</MOD_GLOBAL_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>

[André Schneickert]

Thanks a lot, Oscar!

Do you have an estimate, when the new ILO 2 firmware will be released?

[Oscar A. Perez]

The Quality Assurance team wants few weeks to test iLO2 v2.22 thoroughly. I would say, it should be available on the FTP early September. If you want to test a beta 2.22, you can download it from my temp FTP.

ftp://ilo4me:G!v3t2me@ftp.usa.hp.com/Beta/

[AM-PM]

Any updates for disabling IPMI for iLO v2? 

[Oscar A. Perez]

iLO2 2.23 has been out there for few months already.

[AM-PM]

Ok, thanks. I see that I need to upgrade firmware to version 2.23 for IPMI. I will install and see if I can now see IPMI settings.

[Michael Leu]

Is there also a way to disable IMPI over LAN via the iLO command line interface (SSH)?

Thanks.