Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

How to setup Legacy Boot Protocol( Under NIC configuration) to PXE with either API or PS cmdlets

 
Highlighted
Occasional Contributor

How to setup Legacy Boot Protocol( Under NIC configuration) to PXE with either API or PS cmdlets

How to setup the following configuration on a PCI NIC with either API or Powershell cmdlet?

0311.PNG

1 REPLY 1
Highlighted
Frequent Advisor

Re: How to setup Legacy Boot Protocol( Under NIC configuration) to PXE with either API or PS cmdlets

Before doing it it is suggested first check if that can be enabled from the actual BIOS setup 
to ensure it could be done 

For Enabling customer can use Enable-HPEBIOSEMbeddedLOMPort cmdlet from BIOS Cmdlets module .

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00020913en_us 

Page10

Thank You!
I am a HPE employee

Accept or Kudo

__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!