ILOs are getting always new IP address from DHCP, how we can control frequent IP changes.

[vishalgarg]

Hi ,

We are facing communicatoin issue between ILO and HPEOneView after change the IP of ILO. ILO does not report back new IP to HPEOneview for a long time and we lost communicatoin.

[MV3]

Hello,

Can you ping the iLO IP from OneView?

Procedure:

From the main menu, navigate to the Settings screen.
In the Networking panel, click Networking.
Select Actions > Ping.
The Ping screen will open.
Enter the target host name or IP address, then click Ping.
Check the output in the Results field.
Click Close to stop pinging and close the screen.
If the ping fails, engage your network team to investigate the communication issue.

If there is a reply, remove the old certificate from the OneView Trust store, add the new certificate, and check.

Cheers...

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.