Query: OID to check the status from Agentless Monitoring Service on the iLO Board

[NotB667]

Hi Community,

I have to check via snmp if the Agentless Management Service service is connected to the iLO.
I spend days to search but without succes.
The only thing i can find are manuals how to check the AMS Status manually like this:

Checking AMS status: iLO web interface

    Navigate to the Information, System Information page.

    Click the Summary tab.

    AMS is listed in the Subsystems and Devices table. The possible values ​​follow:

        Unavailable - AMS is unavailable because it was not detected, the server is in POST, or the server is powered off.

        OK - AMS is installed and running.

At the Moment i parse the OID (CPQHOST-MIB) .1.3.6.1.4.1.232.11.2.6.1.1.2 into a array and search if ""agentless management service\"  for Windows, or "amsd" is running.

But i guess this is not the best solution to parse for strings because the iLO know if AMS is running well (see the manual).

Did anyone know how can i check the AMS Status on a iLO5 with SNMP???

Thanks for your support
T0M

[support_s]

System recommended content:

1. HPE Integrated Lights Out (iLO 5) - " The iLO health monitoring status of the device / adapter located in Embedded is not responsive " is shown in iLO Event log

2. HPE iLO 5 2.70 User Guide | Agentless Management Service

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[NotB667]

Hi,

thanks for your answer but may there is a misunderstanding.

I have no problem with the AMS, i wan´t the check the Status "ok" with a SNMP Query because doing it manually (log in to the iLO, go to "System Information", navigate to the "Subsystem and Devices" Section, have a look if the Status is "green" from the "Agentless Management Service" makes no Sense.

But for a check with SNMP i must know what is the OID for that.
That was my question.

BR
T0M

[Suman_1978 · Accepted solution]

Hi,

As far as I know, there is no such option to check.

iLO 5 - Configuring iLO Management Settings

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases