APC MIB Problems - Powernet364.cfg File

[Richard Clark_4]

Am running SIM v4.1 -

Am running into a roadblock, when attempting to register powernet364.cfg (compiled from Powernet364.MIB) -

Error: File 'powernet364.cfg' Error reading MIB: TRAP-TYPE: Invalid severity Line: 17721
AN ERROR OCCURRED EXECUTING THE COMMAND

Also tried an earlier version of APC's MIB, Powernet.MIB, with the same result (different line).

I've attached (hopefully) a copy of the powernet364.mib file, for your review -

Anyone got an idea as to what is going on, and how I can resolve this?

[Martin Blomdahl · Accepted solution]

Try my modified version of the powernet364.mib.(attached)
I dont remember what i changed,
but it works in my IM7SP2 environment.

[Brent Neste]

APC uses different names for their event types. What SIM calls a "major" event, APC calls a "warning" event. Same thing for SIM "critical" events - APC calls those "severe" events.

I modified the attached mib file to fix this. I just ran mcompile on it and then added it to SIM4.1 using mxmib without any problems. Hope this helps.

-Brent

[BroncoBob9]

THANK YOU SO MUCH FOR POSTING THIS!!!

I've been beating my head against the wall for hours. This worked perfectly in HP SIM 5.1.