Server Management - Systems Insight Manager
1833187 Members
2758 Online
110051 Solutions
New Discussion

Re: can't log into local machine agents after HpSIM install?

 
Mark Leffler
Advisor

can't log into local machine agents after HpSIM install?

I installed HpSIM on a working machine (I was able to access the management agents prior to install).

After the installation, I have so far been unable to access or browse to my own machine. What I think the password should be, isn't. I can't reset them because I can't log in as admin, and I have no idea what they have been set to.

Any ideas what the passwords might be, or, how to set/change them?
2 REPLIES 2
Rob Buxton
Honored Contributor

Re: can't log into local machine agents after HpSIM install?

If you have another Server that has Agents with a known password you can copy the file:
c:\compaq\wbem\cpqhmmd.acl from the good machine to the one not working.
This will correct the password problem.

If you don't have that, use the RDU to configure the Agents and re-install them from the RDU.
Mark Leffler
Advisor

Re: can't log into local machine agents after HpSIM install?

Thanks for the solutions.

FYI, I did figure out what the default administrator password was ("administrator"). Interesting, though, that the HPsim install changed it - I had it set to something completely different before the install.