EVA 4100 X HP SIM 5.2

[Rafael Reimer]

Hi all,
does anybody knows what I have to configure to make HP SIM recognizes EVA ? Command View 6.0 is installed in a DELL machine.

Thanks.

[marsh_1]

rafael,

this might help , there's a section on event management :-

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01375124/c01375124.pdf

good luck

[Rafael Reimer]

Thanks for your help, but what I want to do is to make HP SIM recognize EVA when I add the CV host at the system.
I already did that configurations to make CV sends traps do HP SIM.

[David Claypool · Accepted solution]

Command View is an SMI-S provider, which is the storage form of WBEM. You need to supply WBEM credentials for HP SIM for an account that has privileges for Command View.

[Rob Buxton]

HPSIM discovers the EVA via the SMIS-S component that should have been installed along with CV. So you need to have credentials entered into the WBEM section for the server that hosts CV.

I think these credentials should also belong to the Storage Group created by CV on the server.

Google wbemdisco as thats a good test tool.

Also CV6 is getting quite old now, you may want to look at upgrading that.

[Rafael Reimer]

Thanks a lot for your help. Now it is working.