Filter out a process in monitoring

[Rodolphe_1]

Hello,

I've got HPSIM 4.2 and it sends me several alerts concerning a specific process on a defined server.

As this process is like to stop/start, I wonder if it would be possible to filter out it in monitoring by IM agents instead of deleting this process alert as soon as the event is reported in HPSIM.

Thanks.

Regards.

[David Claypool · Accepted solution]

This is set in the HP Management Agents Control Panel applet on the server in question. If you don't want these alerts, go to the Process Monitor tab and remove the setting to monitor the process.

[Rodolphe_1]

Thank you for your answer, but I can't find the HP Management Agents Control Panel applet...

I've accessed the HP Management Agents Configuration part in the System Management Homepage of the server, but I don't find the Process Monitor tab.

Do you have an idea about the default shortcut of this application ?

Thanks.

[Rodolphe_1]

I'm so stupid ; it was obviously in the Control Panel... :-)

Thanks now it must work.

[Rodolphe_1]

Thanks.