Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 5.3 SP1 compatibility

 
Highlighted
Occasional Contributor

HP SIM 5.3 SP1 compatibility

Hi ,

I've upgraded HPSIM 5.2 to HPSIM 5.3 wich have access to an Storage Apliance running Common View 6.02 (eva storage is running XCS 3.31-10) and I 've some problems to have these EVA in HPSIM.
Where can I find the pre-requisites or compatibility matrix ?
Thanks

Patrick
4 REPLIES 4
Highlighted
Honored Contributor

Re: HP SIM 5.3 SP1 compatibility

I'm not sure where a compatibility matrix is but I would have thought this should work.

Have you tried running wbemdisco to check it can get to CV?
Highlighted
Occasional Contributor

Re: HP SIM 5.3 SP1 compatibility

Hi,

find below the wbem discovery on oour system. As u see it didnt find EVA. Is it a compatibility issue between SMIs and SMA 2.01 or CV

C:\Program Files\HP\Systems Insight Manager>wbemdisco 136.173.5.30 5989 root/PG_InterOp administrator hpinvent

C:\Program Files\HP\Systems Insight Manager>echo mar. 05/05/2009 11:17:28,85
mar. 05/05/2009 11:17:28,85

C:\Program Files\HP\Systems Insight Manager>echo off
WbemDisco 01.01.00
------------------
HOST = 136.173.5.30
PORT = 5989
NAMESP = root/PG_InterOp
USER = administrator
PASSWD = *****
Connect to 136.173.5.30 in namespace root/PG_InterOp with SSL=true

ObjectManager.Name=PG:D8F54549-612A-4F52-B6FB-A25B3B6B2924
ElementName=Pegasus
CimomVersion=
Description=Pegasus CIM Server Version 2.5.0.34

Enumerating instances of CIM_RegisteredProfile...

Profile.RegisteredName=Array
RegisteredVersion=1.1.0
ProviderVersion=5.0
HPVersion=EVA5.0-Dev28
SubProfile.RegisteredName=SNIA:Software
SubProfile.RegisteredName=SNIA:Pool Manipulation Capabilities and Settings
SubProfile.RegisteredName=SNIA:Job control
SubProfile.RegisteredName=SNIA:Physical Package Package
SubProfile.RegisteredName=SNIA:Backend Ports
SubProfile.RegisteredName=SNIA:Masking and Mapping
SubProfile.RegisteredName=SNIA:Disk Drive Lite
SubProfile.RegisteredName=SNIA:FC Target Port
SubProfile.RegisteredName=SNIA:Fibre Channel Initiator Port
SubProfile.RegisteredName=SNIA:LUN Creation
SubProfile.RegisteredName=SNIA:Copy Services
SubProfile.RegisteredName=SNIA:Access Point
SubProfile.RegisteredName=SNIA:Location
SubProfile.RegisteredName=SNIA:Multiple Computer System
SubProfile.RegisteredName=SNIA:Block Server Performance
Profile.RegisteredName=Server
RegisteredVersion=1.1.0
Highlighted
Honored Contributor

Re: HP SIM 5.3 SP1 compatibility

Does the WBEM administrator password match the one you put in the CIM running on the SMS? You need to set it on the SMS using cimauth. That's an exception for 6.02, from 7.x and up (I think) there's a trust relationship and no password is needed anymore. If I can make a suggestion, create a dedicated Windows user member of HP Storage Users, test that it can actually log into Command View, then add it to the CIM, and you won't have to use the administrator account.

Good luck
Highlighted
Occasional Contributor

Re: HP SIM 5.3 SP1 compatibility

Hi ,

Finally I have remove some programs (CV6.02,HPSMI-s,HP pegasus) manually and installed again the CV6.02 .Now it works fine.
Thanks for your help
Patrick